Crown Series

Individual down to the last detail:
true vaping connoisseurs create their own personal high-end vaporiser.
100% finest precision work made in Austria!

Crown Series

Individual down to the last detail:
true vaping connoisseurs create their own personal high-end vaporiser.
100% finest precision work made in Austria!

Sets

Everything you need as a vaping connoisseur - in a ready-made set.

DeLuxe Set

The sophisticated combination by VON ERL.

It delights the vaper heart: the stylish Erlthron DeLuxe combined with the Erlkönigin including stainless steel drip tip. Premium quality by VON ERL. For vaping enjoyment that lasts.
EUR327.40

Nano Set

Smaller tank with more vapour performance

The two nano components perfectly complement one another. The battery holder is very easy to use and features a revolutionary control switch, and the smaller size of the tank case make this product a handy companion.
EUR293.40

Erlkönigin

Make the best of your liquids.

The Erlkönigin

The original

Top vaping enjoyment for connoisseurs - the high-end vaporiser for vapers with the highest standards.
EUR127.50

The Erlkönigin - Stainless steel Drip tip

Pure enjoyment: the Erlkönigin with stainless steel mouthpiece

Another version of our best sellers for connoisseurs: the Erlkönigin made completely from stainless steel, from the drip tip to the ground connection.
EUR129.50

The Erlkönigin Nano 3ml

Less filling volume - as much enjoyment

Just like the "big" Erlkönigin, the Nano version focuses on technology. The basic components are the same, only the tank volume was reduced by 50%.
EUR123.50

Erlthron

The perfect mod for your Erlkönigin.

The Erlthron 18650 DeLuxe

Our strong mod for the Erlkönigin

Plenty of power: the new and revolutionary control switch of the Erlthron turns vaping into a whole new experience.
EUR199.90

The Erlthron 18650 Nano

Our strong mod for the Erlkönigin Nano

Plenty of power: the new and revolutionary control switch of the Erlthron turns vaping into a whole new experience.
EUR169.90

The Erlthron 18650 22mm

Our strong mod for 22mm vaporiser

Plenty of power: the new and revolutionary control switch of the Erlthron turns vaping into a whole new experience.
EUR139.90

The Erlthron 18350 22mm

Our elegant mod for 22mm vaporiser

Plenty of power: the new and revolutionary control switch of the Erlthron turns vaping into a whole new experience.
EUR117.90

Drip Tips

Fine mouthpieces for your vaping enjoyment.

Probier mal etwas anderes - mit unserem Edelstahl Drip Tip "Crown". Das Drip Tip "Crown" wird aus medizinischem Edelstahl 1.4404 hergestellt.
EUR18.90
Simple and classic  - the basic yet elegant Drip Tip for your Erlkönigin. The stainless steel Drip Tip is made from medical stainless steel 1.4404.
EUR12.90
The elegant Drip Tip adapter Cone replaces the standard Drip Tips the Erlkönigin comes shipped with. For vapers who want to use their own Drip Tip. The 510 Drip Tip also secures the tank cap. The Drip Tip adapter Cone is made...
EUR9.90
The elegant Drip Tip adapter Crown replaces the standard Drip Tips the Erlkönigin comes shipped with. For vapers who want to use their own Drip Tip. The 510 Drip Tip also secures the tank cap. The Drip Tip adapter Crown is made...
EUR9.90
Try something different - our stainless steel Drip Tip Ring. The stainless steel Drip Tip Ring is made from medical stainless steel 1.4404.
EUR18.90
Black plastic drip tip with an ergonomic design - pleasant to the eye and also to the touch.
EUR7.90

Tanks

Sometimes size does matter…

The stylish tank is decorated with a delicate laser engraving of the German flag in addition to the engraved Erlkönigin logo. The machined look makes it a real eye-catcher. The tank has an outer diameter of 21 mm and a filling...
EUR20.00
The stainless steel tank has an outer diameter of 23 mm and a filling volume of 9 ml. The machined look gives an elegant sheen to the surface of the tank. This tank of course also features a 2-colour laser engraving of the...
EUR29.90
The stainless steel tank has an outer diameter of 22 mm and a filling volume of 8 ml. The machined look gives an elegant sheen to the surface of the tank. This tank of course also features a 2-colour laser engraving of the...
EUR27.90
The tank is made from borosilicate glass and has an outer diameter of 21 mm and a filling volume of 6 ml. The matte surface means that you can always see how much liquid you have left.
EUR19.90
The tank is made from borosilicate glass and has an outer diameter of 21 mm and a filling volume of 6 ml. The transparent surface means that you can always see how much liquid you have left.
EUR19.90
The tank has an outer diameter of 21 mm and a filling volume of 6 ml. This tank of course also features a 2-colour laser engraving of the Erlkönigin logo.
EUR25.90
The stainless steel tank has an outer diameter of 32 mm and a filling volume of 20 ml. Each BigmamA has its own serial number. This tank is only available in limited quantities! It comes shipped with a special BigmamA O-ring set with...
EUR54.90
The standard co-polymer tank for the Erlkönigin has an outer diameter of 21 mm and a filling volume of 6 ml.
EUR12.90
The nano co-polymer tank for the Erlkönigin Nano has an outer diameter of 21 mm and a filling volume of 3 ml.
EUR9.90

Tuning

Make the most of your vaporiser!

This option set provides an alternative type of airflow for mods with AFC (air flow control). Included in the delivery: 1 positive terminal insulation disc for mods with AFC, 3 1/10 discs for the height adjustment of the positive...
EUR13.90
The positive pole holder Open Draw 2 mm has a larger hole in the shaft than the normal positive pole holder. This improves the air supply and increases airflow. The positive terminal mount also conducts electricity. Additionally, the...
EUR15.90
This kit turns the Erlkönigin into a small vaping space miracle that's 14 mm shorter. The co-polymer tank has an outer diameter of 21 mm and a filling volume of 3 ml. Included in the delivery: 1 Nano co-polymer tank, 1 Nano...
EUR32.90
The atomizer chamber is screwed onto the base and encases the coil of the Erlkönigin. The chamber is twice as high as the standard atomizer chamber and therefore provides more room for the coil.
EUR24.90
The insulation washer for the positive pole, as the term suggests, insulates the positive pole between positive terminal mount and the base.
EUR5.90

Spare Parts

100% original components for your vaporiser.

The top cap with integrated filling openings is screwed directly onto the tank. In combination with the refill shutter cap the Erlkönigin can be easily opened and closed without spillage.
EUR23.90
The refill shutter cap serves as a cover for the Erlkönigin. Turning it by 45 degrees opens and closes the filling openings underneath.
EUR16.90
The positive pole screw is at the bottom end of the Erlkönigin. It serves to establish contact between the Erlkönigin and the mod.
EUR1.90
The positive pole holder is needed for airflow. The positive pole holder also conducts electricity. Additionally, the positive terminal clamps are attached to the positive pole holder.
EUR13.90
The positive pole insulating plate serves to insulate and secure the positive terminal mount.
EUR9.90
The 510 ground terminal serves as a mount for the air flow control (=AFC) and also contains the threading to screw the Erlkönigin into a mod. The ground terminal is made from medical stainless steel 1.4404.
EUR9.90
The Erlthron Cage Erlkönigin can only be used in combination with the Erlkönigin. This Cage of the Erlthron serves as protection for your Erlkönigin: this shields the tank and the 510 threading from impacts. Both the 21mm...
EUR44.90
The Erlthron Cage Nano can only be used in combination with the Erlkönigin Nano. This Cage of the Erlthron serves as protection for your Erlkönigin Nano: this shields the tank and the 510 threading from impacts. The Cage is...
EUR42.90
This Top Cap allows you to retool your Erlthron for vaporiser with 22mm tanks. The Top Cap is made from medical stainless steel.
EUR29.90
Every vaper prefers certain batteries for its mod. That's the reason why we offer you the possibility to get your preferred battery case for your Erlthron. The battery case is made from medical stainless steel.
EUR17.90
Every vaper prefers certain batteries for its mod. That's the reason why we offer you the possibility to get your preferred battery case for your Erlthron. The battery case is made from medical stainless steel.
EUR39.90
This is the plain alternative to the battery case 18650 DeLuxe. The battery case is made from medical stainless steel.
EUR56.90
Ridges have been integrated into this battery case, which give your Erlthron a particularly elegant appearance. The battery case is made from medical stainless steel.
EUR84.90
Coil, atomizer chamber and tank are attached to its base. The base is made from medical stainless steel 1.4404.
EUR39.90
The clamping screws are needed to secure the coil. Included in the delivery: 2 clamping screws.
EUR1.90
The AFC (air flow control) adjustment ring helps you control the airflow. The adjustment ring is made from black POM.
EUR6.90
Original ultrasonically cleaned and FDA-compliant premium O-rings measuring 5x1 mm. These O-rings serve as a sealing element between tank cap, tank and base. Included in the delivery: 10 O-rings 5x1 mm
EUR7.90
Original ultrasonically cleaned and FDA-compliant premium O-rings measuring 3x1 mm. These O-rings serve as a sealing element between tank cap, tank and base. Included in the delivery: 10 O-rings 3x1 mm
EUR6.90
The positive pole spacer lifts the positive terminal by about 0.4 mm. The positive pole spacer disc helps to establish optimum contact between the Erlkönigin and the mod.
EUR1.00
The wick ring secures the coil. The wick ring is made from medical stainless steel 1.4404.
EUR7.90
This set includes all O-rings for one maintenance round; for example you can replace all O-rings of the Erlkönigin. These O-rings have been ultrasonically cleaned and are FDA-compliant.
EUR6.90
Original ultrasonically cleaned and FDA-compliant premium O-rings measuring 17x1 mm. These O-rings serve as a sealing element between tank cap, tank and base. Included in the delivery: 10 O-rings 17x1 mm
EUR8.90
GET ME SOME FLAVOUR.